Incoming
and Outgoing Call Features
-
Intelligent
Routing – Return up to 1,500 mobile calls directly
to the calling DDI (Direct Dial-In). CGW-I stores the link
between the dialing extension and the dialed cellular number.
When a missed mobile call is returned, CGW-I recognizes
the Caller ID and routes the caller to the dialer’s
extension.
-
MSN
Routing – Route incoming cellular calls to default
Multi-Subscriber Number (MSN), such as a specific extension,
Automated Attendant or Voice Mail system.
-
Call
Barring – Dedicate your SIM to handle only incoming
calls, outgoing calls, or both.
-
Call
Diversion – Automatically reroute incoming calls to
an alternate channel when SIM is busy.
-
Toll
Restrictions– Define which cellular operator prefixes
to allow the CGW-I to call and which ones not to allow.
-
Redirect
Calls – Override Toll Restrictions and set up a cross-network
connection.
-
Call
Duration – Limit the length of calls to protect you
from connections that are accidentally left open.
System
Management & Monitoring
-
Full
Device Control – Configure system parameters and view
system status levels directly from your PC with included
user-friendly Windows-based utility program.
-
Alarms–
Set thresholds to trigger selected SMS and Email alarms.
-
Statistics
– View Reception Level and each SIM card’s accumulated
traffic.
-
CDR–
Call Detail Recording log for up to 2,500 records.
-
Balance
Call Distribution – Evenly distribute call traffic
sent to each SIM.
Configurable
Controls & Maintenance
-
CLIP
/ CLIR – Display or hide SIM card numbers using Calling
Line Identification Presentation/Restriction setting.
-
SIM
PIN Control – Protect each SIM within the CGW-I from
unauthorized use if removed.
-
Network
Lock – Configure your CGW-I to work permanently with
only a specific operator.
-
Roaming
– Allow calls to automatically connect to the strongest
available signal or restrict them to a specific network
operator.
-
Dialing
Mode Support – Overlap or En Block.
-
End
of Dialing Digit – Reduce the time required to connect
a dialed number.
-
Gain
Control – Adjust volume levels for both incoming and
outgoing calls on each channel.
System
Specifications
-
2 Voice
Channels:Each with Integrated GSM Cellular Module
-
Indicator
LEDs: LAN Status (Line and Active), Module Status (2)
-
Built-in
LCD: Verify Signal Strength, Operational Status and Cellular
Operator Name to simplify maintenance.
-
ISDN
Protocol Support: EuroISDN (Standard, In Bound DTMF Dialing,
France, Germany), 1TR6 (Germany)
-
PBX
BRI Interfaces: NT/TE,PtP/PtMP
-
Connectors:RS-232,
, LAN, ISDN Interface, SMA antenna (2), Sync In, Power supply
-
FrequencyRanges:
900/1800 MHz or 850/1900 MHz
-
SIM
Card: 3V (Plug in, Small)
-
Receiver
Sensitivity: -104dBm
-
Input:
110VAC, 60Hz / 220VAC, 50Hz
-
Output:
9VDC, 1.5Amp
-
Dimensions:
(HxWxD)– 21.5x4.3x18.5cm/8.47x1.69x7.28 inches
-
Weight:
0.96 kg / 2.12 lbs
-
Operating
Temperature: 00C-450C / 320F-1130F
- Relative
Humidity: 5-95%
|
